|
MINIcharge
Download Specifications
The WOODS MINIcharge is a switch-mode battery charger &
power supply with a constant voltage regulated output. The MINIcharge is ideal
for all small applications, such as; home workshop, wheelchair or golf buggy
situations and any other set-and-forget recharge station. Feature rich in its
safety and usability.
POWER
Universal ac mains - 110Vac and 240Vac switch selectable makes this
unit ideal for all mains voltages.
Available in 12V, 24V, and 48Volt - The common range of battery
terminal voltages are catered for.
Available in 4A, 8A, 16Amp - Powerful constant current ratings on each
unit.
PROTECTION
Input and output - internal fuses protect the MINIcharge from external
faults.
Temperature controlled fan cooling - The internal assembly is
protected by an automatic thermoswitch. If the temperature rises above its
preset level the fan will be enabled untill it has cooled the system to below
its lower setting; thus disengaing the cooling fan. This extends the fans’
operating life.
Over-temperature shutdown - If, due to severe loading
or other fault, the temperature exceeds its safe operating level it will shut the battery
charger down untill the cooling fan brings the temperature back within safe
operating levels.
Reverse battery - If a battery is connected in reverse polarity, the
battery charger will not charge untill the
fault is cleared.
No battery connected - The battery charger will maintain dead
voltage-free output untill it detects a battery has been connected. The
"TEST" button may be pushed to activate power supply mode.Other battery faults -
Output Short Circuit, Battery Over-Voltage, Battery Under-Voltage, Overload.
CONTROL
Switch-Mode technology - The MINIcharge employs the latest in
high-frequency charge control.Voltage Regulation and Current Limiting
- Output voltage regulation ensures that the batteries being recharged to not
become overcharged and damaged. The output current of the MINIcharge is
limited to its maximum to prevent overloading.
BATTERIES
Wide range - due to the filtered output of the MINIcharge, many
battery types are compatible, eg:
Gel-Cell, Sealed Lead-Acid, Wet Lead-Acid, Deep Cycle Lead-Acid, Lead-Calcium,
Genesis®/Optima®, etc.
DISPLAY
LED indication - Bright, labelled LED provide instant clear indication
of the charging status.
CABINET
Strong, durable, attractive - Powder-coated zinc-annealed steel
cabinets.
Mountabilty - The MINIcharge may be
mounted either on a bench or shelf.
Portability - Light and compact, The MINIcharge is extremely portable.
COMPLIANCE
Safety Standards - CSA INTERNATIONAL MARK APPROVED (CSA1010.1,
UL3101.1, IEC1010.1, EN61010.1) APPROVEDEMC Standads - CISPR22
(EN55022), IEC801-2,3,4 IEC555-2 VERIFICATIONIP Rating - IP21
Back to Products -
Download Specifications
|
